WerEver's Proprietary Joint - Strongest in the Industry

Our hardware-free joint is locked in place. This allows the joint to expand and contract without loosening. With no other materials of different density introduced into the joint, expansion and contraction caused by outdoor temperature changes occurs at the same rate, allowing the joint to move together as one piece. This technique is exclusive to WerEver's manufacturing process. Other competitors are using woodworking techniques that simply won't work with marine grade High Density Polyethylene (HDPE). Other competitors still use glue and adhesives to hold various pieces together. You can do your own test. Get a free sample kit and try gluing the pieces together with the strongest glue you can find. Then try to break the joint. You will be surprised how easy a glued joint can break.

Competitor #1 Cabinet

This is an actual picture of a competitor's cabinet. While their cabinet may look similar from a distance, this joint is not as strong. As the cabinet is exposed to temperature changes outdoors, the material will expand and contract, loosening the joint. Plus, the joint is only secured at points compared to the continuous strength of our hardware-free joint. This technique is acceptible for products used inside a temperature controlled environment (indoor). Unless you live in a climate that never changes, these connectors WILL wiggle loose over time. And further, the metal inside these connectors is not stainless steel.

Competitor #2 Cabinet Spreader	WerEver's Cabient Spreader
This is another competitor's top spreader. A spreader holds the two sides of a cabinet together above the drawer. Notice how the joint is crooked, and only held at a single point. This same cam bolt technique is used throughout the cabinet	WerEver's hardware-free joints are not only stronger, but the fit is precise. The can't wiggle loose, and the joints fit perfectly.
Competitor #2 Cabinet Bottom	WerEver's Cabinet Bottom
Just like the spreader joint above, the competitor holds their cabinet bottoms together with cam bolts. The cam bolts are not stainless steel, so they can fail outdoors.	WerEver's hardware-free interlocking joint creates continuous strength throughout the entire cabinet bottom. Our joint is much stronger, won't wiggle loose, won't rust, and is a much more precise cabinet construction technique.
Competitor #2 Drawer Slide	WerEver's Hardware-Free Drawer Slide
This competitor uses a zinc coated drawer slide. This will rust and deteriorate.	WerEver's hardware-free drawer slide not only moves smoothly, but it also does not have bearings that will attract dust and debris.

Competitor #3 Product Trial - by WerEver Products Inc.

A fabrication technique for HDPE sheets is to weld joints. Another competitor welds their structural joints. This technique is not new, and is an acceptible technique for some applications. However, for a structural joint under a load, the stress when combined with expansion and contraction will cause this joint to break over time. This picture is of a three year test conducted by WerEver Products of a welded joint. Initially, the weld held strong, but as the cabinet was tested outside, exposed to temperature changes, the weld broke.